kwt Posted December 3, 2018 Posted December 3, 2018 I got this snow cab when I bought my Sovereign. I'm thinking that this cab was never on this tractor and is not for this tractor. Anybody recognize it? Soft cab, hard top. Doors say Simplicity.
MikeES Posted December 6, 2018 Posted December 6, 2018 Take a few pictures from further away to see the whole cab, then we might be able to help with its identification.
kwt Posted December 6, 2018 Author Posted December 6, 2018 4 hours ago, MikeES said: Take a few pictures from further away to see the whole cab, then we might be able to help with its identification. I thought about that and I will, but I thought someone might recognize the vertical supports @ the front window, and the clamp @ the rear. The cab looks like any other.
MikeES Posted December 7, 2018 Posted December 7, 2018 The 7100/900 cabs had the long vertical supports, but usually those cabs also had the window offset for the manual lift lever. Unless a cab was made just for the hydraulic/electric lift tractors. Original Cab company also made a cab for the 300/400 series just for the 300D with no offset/cutout for the lift lever. It also had vertical supports but they ended much shorter and different than your picture. But all of the Large Frame Tractor cabs would have had zippers in the vinyl just below the windshield about a foot apart for opening the hood. I do not see those on your pictures.
kwt Posted December 8, 2018 Author Posted December 8, 2018 Wow. 6 months ago the pictures taken from my phone were blurry. Now they are unrecognizable. I have a "dirty job" and my lens is so scratched as to be unusable. Wifey is away so pics will have to wait. I'm thinking that the military grade Kyocera DuraXV should have had the lens recessed. There are no zippers. On the right, as you sit on the tractor, there is kind of a tall box with a slit that I assumed was for the spout control.
JohnMBerst Posted December 10, 2018 Posted December 10, 2018 Looks like the cab on my 6200 / 6500 series, as best can tell. Photos of mine for a bit of reference.
kwt Posted December 11, 2018 Author Posted December 11, 2018 That's it John. At least the front supports are the same. I'm not very familiar with that next size down tractor, but my father has a 4211. Do you know if these are similar? 42,52,62 series?
JohnMBerst Posted December 15, 2018 Posted December 15, 2018 I know that would be close, as the length of the seat pan might determine if fitting. The running boards for the 42-52-62 are all the same I believe, as could just move forward a bit to fit the next group of holes in the boards.
Recommended Posts