Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
johnkc

716h k341 spec #

Recommended Posts

johnkc
need spec/type # for a k341 in a 1977 or 1978 716h, my motor is gone and need spec to come up with a suitable replacment .or if any one has a k341complete would be interested in it. any help is appreciated,thanks ,john. email me at jonboatman1@hotmail.com

Share this post


Link to post
Share on other sites
HubbardRA
John, As of three weeks ago I could have picked up a K321 and a K341 for approximately $300 each. I got a K321 which I needed for my son's tractor pulling. Carb needed cleaning and air cleaner was missing. Re-did carb, fired up, purrs like a kitten. No smoke. These engines were removed from equipment to be discarded at a golf course. I live in VA. I could check to see if they are still available for someone who is really interested. They are not mine so I can't give any guarantee of condition. I only know about the one I bought. Rod H.

Share this post


Link to post
Share on other sites
jlasater
If you shop around, you might be suprised to find that you can get a twin cylinder Honda 18HP engine for the same price or less than a new Kohler K341S. I don't recall where I saw it, maybe Northern Hydraulics, but the Honda was $300 cheaper than the Kohler. Sure it'd take some light fabrication, but when my engine expires, I'm upgrading.[A href='http://www.wheatfarm.com']http://www.wheatfarm.com[/a]

Share this post


Link to post
Share on other sites
johnkc
thank you all very much for the info , it has helped me locate a new engine. a little pricy,950.00but it is new and is a direct replacement except the orig .crank had 1"shaft and this one is 1 1/8" wich will suit me because i don't have any front pto attachments. and if i ever do i can install the 1 1/8 clutch. thanks again,john.

Share this post


Link to post
Share on other sites
Guest
Not all the 716 Hydro's had a k341 some of them had a 16hp Briggs which would be a model 326431.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • GregB
    • AllisChalmers716
    • stouchton
    • 720nut
    • BLT
    • a_sannine
    • Bill725
  • Today's Birthdays

    1. wbakunis
      wbakunis
      (28 years old)
  • Recent Status Updates

    • SonOfCreepfeed

      SonOfCreepfeed

      Thinkin' about this old girl.

      · 2 replies
    • Dean McFadden

      Dean McFadden

      Good morning peeps! I’m always searching for helpful information with my AC collection. Hope to find out new information and pass on my own experience in restoration. Here are some pics of my babies. I’m still looking for front rims for the 410 so yesterday I put the 310 wheels on took it for a drive. Working pretty good but still needs some carb work. Gotta get the 310 running next. Have a great day!😁
       

      · 1 reply
  • Adverts

×