dav-1 Posted January 6, 2019 Posted January 6, 2019 trying to find the part number of the s/g belt for a B-1. the belt charts i find here are so small i can not read them w/ a magnifying glass and i can't enlarge them. the auto parts belt is stretched to the max after 2 years of moderate use. and will the same belt work on my Landlord and Big Ten? thanks, dav
Simplicity7013H Posted January 9, 2019 Posted January 9, 2019 (edited) Hello, The Belt should be a 3/8"x 38". That belt should work on your other tractors too. Edited January 9, 2019 by Simplicity7013H
ShaunE Posted January 9, 2019 Posted January 9, 2019 (edited) On the top of this page in the "Downloads" section, there is a Blade & Belt Book that was uploaded by @BLT. In that book, you can look up the Simplicity Variants to your tractors. The B-1 would be the same as a 700 or 725. The Big Ten will be the same as a Landlord 101 which takes a different belt than a 2012. Anyways you get the picture. This is a great book to have downloaded in your computer files. I have several of these dating back. The one I have at work is dated 2004 & doesn't go back far enough to the 700, 725 & B-1 tractors so I'll have to look for that one tomorrow if I remember. The SG Belt for your Big Ten should be 1607323. That is the same SG belt for the 9hp & 10hp Landlord & B-10 & Big Ten tractors. The 12hp Landlord & B-Series tractors take a different belt. Update! The SG belt for your B-1, 700 & 725 is 176393. Edited January 10, 2019 by ShaunE
Recommended Posts