Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
sparky27

Good Parts Tractor for Deutz 1815?

Recommended Posts

sparky27

Hello,

I have recently purchased a Deutz 1815H. The tractor is in need of a mower and decent seat. It came with a 38" mower (1690838- which is not in the what mowers fit guide) and 42" mower (ID Number has been removed), but I don't believe they are for this tractor. I am currently looking for a parts tractor that has a seat and most importantly a mower deck. I know a guy selling an allis 816 gt. The small frame garden tractor conversion chart lists an Allis T-800 and 800 series (I'm not sure if mine is a T-800 or just an 800 series). Would most of the parts and mower from the Allis bolt on my Deutz? What would the best parts tractors be for this model (800Gt and 6216)? According to local tractor shop, any 6000 series decks would work on this model. Is that correct? Are there any other series mowers that fit?

 

Any help would be greatly appreciated!

1815h.jpg

deut.jpg

Edited by sparky27

Share this post


Link to post
Share on other sites
dhoadley

If your 1815 is a vertical shaft engine, the A/C 816 just might fit. I'd measure the front mounting tabs on tractor and deck, and if they match you should be able to get them to work. One of the decks you have may work, measure them up before looking elsewhere. Oh, and welcome to the club.

  • Like 1

Share this post


Link to post
Share on other sites
JohnMBerst

My guess is this is closer to a 6500 series, as looks to have hydro, not 3 speed Vera drive like 6216's.  Not sure the model for picture.

All 5200, 6200, and 6500 Simplicity attachments should work.  I have versions of this, 6216 and 6516, and decks and blower are compatible.

Hope this helps some.

  • Like 1

Share this post


Link to post
Share on other sites
sparky27
2 hours ago, dhoadley said:

If your 1815 is a vertical shaft engine, the A/C 816 just might fit. I'd measure the front mounting tabs on tractor and deck, and if they match you should be able to get them to work. One of the decks you have may work, measure them up before looking elsewhere. Oh, and welcome to the club.

Quote

 

I hope one of the decks does work. Now I just have to wait for it to warm up a little before I get out in the barn and have a look. Thanks for the help and for welcoming me!

1 hour ago, JohnMBerst said:

My guess is this is closer to a 6500 series, as looks to have hydro, not 3 speed Vera drive like 6216's.  Not sure the model for picture.

All 5200, 6200, and 6500 Simplicity attachments should work.  I have versions of this, 6216 and 6516, and decks and blower are compatible.

Hope this helps some.

Maybe I should hold off on the 816GT and wait for something that has the same tranny, I really only wanted it to have the extra parts for my 1815H. The attachments bit will be extremely helpful, thanks!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Who's Online (See full list)

    There are no registered users currently online

  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • Paul M.Murphy

      Paul M.Murphy

      Hello glad I got on this site. I hope to upload a couple of photos of my Simplicity Broadmoor 
      Model 707 Tractor. I have replaced all the belts on it and installed a new ignition switch.
      Have a mower deck which was in poor shape , repaced a couple of bushings and welded the
      deck where there was some holes. The tractor and mower deck came from a friend and the 
      mower deck metal was getting pretty thin. Some new metal was put in it and we also undercoated the underside of the deck. This was done by my friend Greg Toulman.
      I have not put the mower deck on the tractor yet, waiting for Greg to come home and give me a hand. Can you please tell me if there is a manual for the mower deck and where I could get one.
      I would also like to get some moon wheel discs as well.
      I will try and down load some photos of the tractor when my wife shows me how to. 
      I really love driving this tractor and also how well it is made compare today's tractors, especially the flexible rear end and the rollers.
      Tell the next time 
      Paul
       
      · 8 replies
    • jbrooks

      jbrooks  »  Talntedmrgreen

      Josh
       
      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
  • Adverts

×