phillobbezoo Posted April 20, 2019 Posted April 20, 2019 I’m wondering if anyone has rebuilt the cylinders on a danco loader before. If so do you know if the cylinders are just an oring or is there an actual packing in them? Do the ends screw off or is there a snap right like the ark loaders?
phillobbezoo Posted April 21, 2019 Author Posted April 21, 2019 Yeah I’ve done 3 arks in the past, I have orings for the ark loaders here. If possible I’d like to have the oring/seals/ parts here before I take them apart.
720nut Posted April 23, 2019 Posted April 23, 2019 On 4/21/2019 at 5:58 PM, phillobbezoo said: Yeah I’ve done 3 arks in the past, I have orings for the ark loaders here. If possible I’d like to have the oring/seals/ parts here before I take them apart. call me
720nut Posted April 24, 2019 Posted April 24, 2019 Phil what I have from first cylinder rebuild , been a while but I think I have enough for 4 cyl's The Danco cyl use a 1/8" sq. piece of key stock , you have to pry the end up and I used a small pair of visegrips to pull wire out as I turned the end. Like I said if your interested call me
phillobbezoo Posted April 24, 2019 Author Posted April 24, 2019 12 hours ago, 720nut said: Like I said if your interested call me When I get the tractor back home and have it in front of me I’ll give you a shout. Thanks Llyod 1
Recommended Posts