Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Alltractoredup

Kohler Magnum clutch removal on Sunstar

Recommended Posts

Alltractoredup
42 minutes ago, RAC said:

First off, those 3 outside bolts have to come off, remove the PTO brake cover then see if it'll slide off.

Ok, I will give it a try and check back with update

Share this post


Link to post
Share on other sites
Brettw

I'm not sure those three bolts should come off.  If they are the spring loaded bolts, they are for the adjustment of the clutch.  The entire assembly should come off when the mounting plate is unbolted from the block I believe?

Share this post


Link to post
Share on other sites
Alltractoredup
47 minutes ago, Brettw said:

I'm not sure those three bolts should come off.  If they are the spring loaded bolts, they are for the adjustment of the clutch.  The entire assembly should come off when the mounting plate is unbolted from the block I believe?

That is what I was thinking too.  It should slide off as an assembly

Share this post


Link to post
Share on other sites
PhanDad
1 hour ago, Alltractoredup said:

That is what I was thinking too.  It should slide off as an assembly

It should come off as an assembly.  Here's some pics and cross section dwg of what your dealing with:

IMG_9731.thumb.JPG.4a0b9ed5ae671a932c8b791b00f2d5d6.JPG

IMG_9730.thumb.JPG.ef6f0ec9f290069dafca0c75b4de51b8.JPG

IMG_9732.thumb.JPG.f4591dab51d6dd5753b5a8c5f8de3d8a.JPG

I-5215-142a_-_B(1in).JPG.c4c87601563234587fd6a4a6c0c96341.JPG

I'd try some wood wedges behind the whole assembly.  Issue with that is, at least in my electric clutch, the rear bearing is only staked in, so it'll probably move and have to be re-staked.  

I'm thinking if you use a puller pulling on the pulley, the pulley will get bent.  

 

  • Like 1

Share this post


Link to post
Share on other sites
PhanDad
7 hours ago, Alltractoredup said:

I just tried it again and it slid off as an assembly with some patience and PB Blaster.  Thank you all

Glad to hear.  

 

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Who's Online (See full list)

    • RayS
    • JohnMBerst
    • GregB
    • deebig
    • RickoHB212
    • MTopp
    • Mach1martysr
    • TomSchmit
    • SmilinSam
    • Md1227
    • gwiseman
    • Tom45
  • Today's Birthdays

    1. littlefan
      littlefan
      (60 years old)
  • Recent Status Updates

    • Paul M.Murphy

      Paul M.Murphy

      Hello glad I got on this site. I hope to upload a couple of photos of my Simplicity Broadmoor 
      Model 707 Tractor. I have replaced all the belts on it and installed a new ignition switch.
      Have a mower deck which was in poor shape , repaced a couple of bushings and welded the
      deck where there was some holes. The tractor and mower deck came from a friend and the 
      mower deck metal was getting pretty thin. Some new metal was put in it and we also undercoated the underside of the deck. This was done by my friend Greg Toulman.
      I have not put the mower deck on the tractor yet, waiting for Greg to come home and give me a hand. Can you please tell me if there is a manual for the mower deck and where I could get one.
      I would also like to get some moon wheel discs as well.
      I will try and down load some photos of the tractor when my wife shows me how to. 
      I really love driving this tractor and also how well it is made compare today's tractors, especially the flexible rear end and the rollers.
      Tell the next time 
      Paul
       
      · 9 replies
    • jbrooks

      jbrooks  »  Talntedmrgreen

      Josh
       
      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
  • Adverts

×