720nut Posted July 1, 2019 Posted July 1, 2019 I have this posted elsewhere but know Talking Tractors gets more coverage. I started it yesterday to move it out of garage , it had been working ok up to this point. It moved about a foot and stopped and will not go either direction. Steering and hydraulics seem to work fine . I did put new engine mounts in and had it lifted as far as it would go to get them in , not seeing how or why this might have caused it to not move , I put a qt of atf fluid in and nothing. Does it need bleed or is there a valve like on the Sovereigns. I'm at a loss as to what to do , sure don't want to have to buy a used hydro unit. any help would be much appreciated , thank you
BruceH Posted July 2, 2019 Posted July 2, 2019 Make sure the Hi/Lo lever has not shifted into neutral. 3
Talntedmrgreen Posted July 2, 2019 Posted July 2, 2019 Lloyd, there are poppets on top of the pump, just like a Sovereign has. The panel between your feet needs to come off and you will see them if they aren't covered with grass. I find it hard to believe they got depressed, but it's worth a check. 2
720nut Posted July 9, 2019 Author Posted July 9, 2019 On 7/2/2019 at 10:53 AM, BruceH said: Make sure the Hi/Lo lever has not shifted into neutral. I'm not sure what happened but I put tractor in low range last night and it took off and has been ok since. first time I moved range lever it was very hard to move , now it is real easy , so apparently something was sticking. Josh thanks for info , I'll take that cover off and give it a good cleaning as everything on this tractor was covered in crud 2
Recommended Posts