LesH Posted May 15, 2002 Share Posted May 15, 2002 I have a Simplicity 6116, with the 16 hp Briggs. The muffler deflector,?? is rusted/ rotted off. Does the exhaust point out forward or down towards the ground?? It seems like everything under the hood is really getting too hot. Also there is a rectangular piece of sheet metal attached on the front of the muffler. I am not sure if it is mounted towards the up or down position. I someone could post a picture it sure would help me out. Thanks. Link to comment Share on other sites More sharing options...
ScottS Posted May 15, 2002 Share Posted May 15, 2002 have you looked at these pictures?[A href='http://www.simpletractors.com/Main/simplicity.htm']http://www.simpletractors.com/Main/simplicity.htm[/a] Link to comment Share on other sites More sharing options...
arnoldir Posted May 16, 2002 Share Posted May 16, 2002 I'm going to take a guess that the 6116 is the same as the 6216 that I own. The exhaust deflector (outlet) points to the right side of the tractor, and exits above the frame. It is a pancake looking part that screws into four holes that surround the opening on the bottom of the muffler, and has a rectangular tube about 1/2" by 1 1/2" that sticks out past the edge of the frame about 1". Regards Link to comment Share on other sites More sharing options...
Recommended Posts