Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Powermax belly pan


720nut

Recommended Posts

Does anyone have the measurements for the belly pans on the Powermax tractors ?

I'm in need of one and have built them in the past but never bothered to rite the measurements down.

Don't understand but in all of them I've had over the years only one had this pan and it's very critical to keeping these tractors cool.

Link to comment
Share on other sites

Lloyd; I have one in my shop and off the tractor right now. I will take some pictures with a tape measure beside it in a bit and post them tonight.

Link to comment
Share on other sites

2 hours ago, B10Dave said:

Lloyd; I have one in my shop and off the tractor right now. I will take some pictures with a tape measure beside it in a bit and post them tonight.

Thank you Dave , Stephen was going to get me some too but said it may be a couple of weeks

Link to comment
Share on other sites

Lloyd; here are some pics to augment Carl's dimensions.

601b3a619c8e8_pan001.thumb.jpg.e590036531e1f63c77c2961f333ac019.jpg

 

601b3aae0dcfe_pan002.thumb.jpg.492a37efb2fb7f454bbaf5dc49187c87.jpg

 

601b3af4a96b7_pan003.thumb.jpg.5aaab9277da0423c3d81f79cbaf6255a.jpg

 

601b3b3876520_pan004.thumb.jpg.908391b703edd8c1916f3a4f5284b825.jpg

 

601b3b860af8b_pan005.thumb.jpg.b5994edd37306277f538ab1aae1d4325.jpg

 

601b3bccf1d0e_pan006.thumb.jpg.b45c7dc8936930876f84c99076df05d7.jpg

Starting from the narrow end first holes are at 1 3/8 in.

601b3c1788408_pan007.thumb.jpg.da94be454512297ef5400ced71c3500d.jpg

Second holes are at 9  7/8 in.

601b3c68b9103_pan008.thumb.jpg.7157a0ae77faf829e9e32c0d122bfc40.jpg

Third set of holes are at 18 7/16 in.

601b3cb09cfae_pan009.thumb.jpg.185daab5117d09118c3db1fb1df4fc1b.jpg

Holes just before the taper starts are at 24 3/8 in.

601b3cfa59352_pan010.thumb.jpg.b98d6940c86e6ddfeae8fcf7618ea29e.jpg

Holes at the wide end are 1 in. from the end.

601b3d4187f46_pan013.thumb.jpg.8f31210ea2f2a777cced1da119ba88d2.jpg

The wide end holes are 13 3/4 in. on center.

601b3d892333f_pan014.thumb.jpg.788be5b32bcd6d19a3f74cd304c2659e.jpg

Holes on the narrow section are 8 in. on center.

Hope these help. 

 

 

 

 

Edited by B10Dave
  • Like 2
Link to comment
Share on other sites

Dave and Carl, just don't know how to thank you guys , now all I got to do is find some 16 ga steel to make them out of

at least that's what I thought they was thick

Here's my drawing of pan from measurements ya'll supplied hope I got it all, thinking of getting .100" plate as I'm not sure what thickness they were.

DSCN4073.JPG

Edited by 720nut
  • Thanks 1
Link to comment
Share on other sites

Also a bit of straight edge at wide end for hole. ~3/4" -7/8"? Sorry I didn't mention before. You can see them in a couple of B10Dave's pictures.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online (See full list)

    • Bill725
    • Darl Swartz
    • BLT
  • Recent Status Updates

    • gwiseman

      gwiseman

      As you know SimpletrACtors.com has changed some recently. Working through this so PM me with questions, suggestions, and/or challenges you have. Appreciate your patience and feedback.
      · 0 replies
    • gwiseman

      gwiseman

      Site programming updates were made 3/23/2024. As a result some things have changed including dues payment options. We will continue maintenance and work with technicians to regain credit card payment option and clear up minor challenges. On positive it appears attaching pictures is now easier. Good day. Gene 
      · 1 reply
  • Adverts

×
×
  • Create New...