Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

B10 bevel gearbox & transmission seals and bearing


DavidG

Recommended Posts

I have a '63 B10 that I'm currently restoring. Most of the oil seals on both the bevel gears and transmission are leaking. Also some of the shafts have a bit of play in them. I would like to know if the seals and bearings are still available from Simplicity, and would also need part #'s. If not, who else might carry equivalant parts. thanks
Link to comment
Share on other sites

All BGB parts are available. If there is looseness, disassemble the entire box and replace worn parts before the box fails and you have an expensive repair. Determine the Simplicity equivilent product number for your tractor. Then see if Simplicity has manuals online. Order parts from one of our sponsors.
Link to comment
Share on other sites

David, you will find we stock everything needed to rebuild your BGB, and a service manual to tell U how! See our sponsor ad on this site. S>L>I
Link to comment
Share on other sites

  • 4 weeks later...
I recently rebuilt my bgb,likely the needle bearing on the input shaft had not destroyed the houseing,if it had,the houseing is@200bucks so i have heard. all parts are available from your dealer.You could cross the seal&bearing #'s but the dealer price was'nt bad.my rebuild was less than $100 minus the horizontal shaft.
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...