How to replace existing armature with car ignition coil

[landlord2110]

To get a better spark on my landlord 2110, can you replace the armature with a car ignition coil? If so, does the regulator get removed? What else is involved?

 

[PhanDad]

57 minutes ago, landlord2110 said:

To get a better spark on my landlord 2110, can you replace the armature with a car ignition coil?

See this post as a starting point:

https://simpletractors.com/research/do-it-yourself/__magneto_to_coil/

 

57 minutes ago, landlord2110 said:

If so, does the regulator get removed?

Assuming you mean voltage "regulator", it stays - it's part of the charging system, not ignition system.  

 

[landlord2110]

I was hoping to use the electronic ignition & automotive type coil. Accordingly to this article, you cant.

[rbstuartjr]

Currently there is no simple plug and play electronic ignition for an external coil system. There are ways to do it but that requires you to piece a system together  your self. 

[EDS]

I have a replacement ignition made from mostly automotive  parts. I uses a modified GM PC2 crank sensor for the trigger and a GM LS2 ignition module. See edstoller@earthlink.net   . One can also use a mid 1980s Control Module with a conventional  ignition coil. I make the trigger for that.