Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

BGB Seal Dilemma


Horvik

Recommended Posts

Hello;

Went to repair the left leaking seal (As Seated On Tractor) on the 3416 H BGB. Pulled the old bad seal out and noticed that the new ones, part 2118117SM , were made different  as far as internal depth goes compared to the original. See picture.  The "New" one will not go in all the way in solid and level with the boss of the casting  as the original seal did. Now I looked very carefully to see if anything else was wrong after this problem came up and all looked good.  Frustrating when you are trying to make a tractor run and the new parts are different. If anyone has ideas that would be great.

Al the best

 

IMG_20230407_171908_0.jpg

IMG_20230407_171646_0.jpg

Link to comment
Share on other sites

@HorvikWrap electrical tape around the retaining ring grooves and keyway to protect the seal lip from getting torn and lube the shaft and seal with oil prior to installation.

  • Like 3
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...