Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Snowblower hitch question


landlord2110

Recommended Posts

landlord2110

Will this fit the landlord 2110(snowblower hitch) & will this work for the 42" snowblower? Would the belt length be different to the standard landlord 2110 snowblower? 

8Mcu_uveS.jpg

Link to comment
Share on other sites

That hitch is designed for a 7100 series through the end of production, and to run off of the center/rear PTO.  Prior to that, the hitches are similar in how they pin up to the front axle, but have 2 pulleys and are designed to run off of a front PTO.  Your 2110 has an even different setup in that you run a fixed pulley off of the front and a different engagement system as part of the hitch itself.  I am not very familiar with those, but your tractor may even operate with the 3 pulley hitch assembly.  Either way, that hitch will not work without major fabrication and modifications to the hitch and the tractor itself.

  • Like 1
Link to comment
Share on other sites

2 hours ago, Brettw said:

Either way, that hitch will not work without major fabrication and modifications to the hitch and the tractor itself.

Anyone ever try to run the above single pulley hitch from the hanging PTO of an FTD?  Maybe modifications wouldn't be necessary, just the correct length belt.  

I know several folks have run the single pulley hitch on a 7000 series tractor but can't remember anyone using it with an FDT.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...