Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sovereign throttle washers - nla?


gwiseman

Recommended Posts

gwiseman

My Hydro18 throttle will not hold position. I’ve tightened but that did nothing. So, on April 4 I ordered couple sets from Jacks since I also have an AC910 and B210 w/this throttle setup. This is my third email notice. Taking bets on whether or not I get em.IMG_0203.thumb.png.96be62ebf77bc9773df6ab4e728bfb8c.png

Link to comment
Share on other sites

GregB

You check with any other sources?


I use them as they are "close" to me.

I had something on back-order for the Husqvarna AWD walk behind I use.

Four months but I eventually got the part.

 

Link to comment
Share on other sites

acken

Same source, but different parts.  I placed an order including basic gasket kit for single cylinder K series carb.  A few days later received confirmation, and told six weeks to get the carb kit.  I canceled the BO parts, and had the rest shipped.  

I think that washer is a plastic material.  You may want to look at McMaster-Car to see if they have substitute.  Try delrin shims for search.

  • Like 1
Link to comment
Share on other sites

Chris727

Probably NLA. I have had a tie rod on order for the Prestige since September. 

Link to comment
Share on other sites

Mikeac

I’ll take a look. Might have some of those washers. 
chris what’s the tie rod number your looking for.

  • Like 2
Link to comment
Share on other sites

gwiseman
15 hours ago, Mikeac said:

I’ll take a look. Might have some of those washers. 
chris what’s the tie rod number your looking for.

Let me know. I’ll buy a set

Link to comment
Share on other sites

Mikeac

Your looking two of each of those in the above picture correct 

Link to comment
Share on other sites

gwiseman
1 hour ago, Mikeac said:

Your looking two of each of those in the above picture correct 

I actually need one set but ordered 2 sets to have an extra on hand. 

Link to comment
Share on other sites

On 5/4/2024 at 8:14 PM, acken said:

…  

I think that washer is a plastic material.  You may want to look at McMaster-Car to see if they have substitute.  Try delrin shims for search.

I am going to check McMaster Carr. 

On 5/12/2024 at 12:04 PM, Mikeac said:

Your looking two of each of those in the above picture correct 

Thanks to @Mikeac sourcing so I will have “backstock”. I will put those on the parts shelf for later use. 
IMG_0203.thumb.jpeg.ce39f887ffaf0045487947c0b98de4e4.jpeg

received today from Jacks. Must have had to look hard for them. Couple of the washer pkgs dated 2/2022. Others not dated. Glad to get them but I wouldn’t expect to find this stuff much longer. 

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...