Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
ultimatehick

7116 Hydro question

Recommended Posts

ultimatehick
I was woundering how i would hook up a plow that has an angle that works by a Hydrolic pump. I was looking under it and i dont seem to see how the lines go to the frount of the tractor so that i can just hook up implements like a hydrloic plow. thanks Ben

Share this post


Link to post
Share on other sites
Dutch
Ben, There's several different ways you can do it. No matter what, you will have to "tee" off your existing lines and run 2 new lines to the front of the tractor with "quick disconnects". 1) Install a diverter valve. That would be the cheapest and easiest. You could use your existing valve and lever and just select which it operates. 2) Install a second valve, or remove your existing valve and replace with a double valve. You would also have to improvise another lever. 3) Install electric solenoid valves and use switches or a joystick.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×