Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
doogie_ac61358

A/C 716 attachment options

Recommended Posts

doogie_ac61358
Does anyone out there know how to make a one bottome plow for the 716, and also does anyone know how to make a bucket for the front of the tractor. I am working w/a tractor that was given to me and currently have done some modification to it. I am looking at making a regular front end loader for it and could use any thoughts, suggestions, drawings, or anything you have to say for assistance. Doug Freeman "Angel from above"

Share this post


Link to post
Share on other sites
Dutch
Don't know what you mean by "make" a plow, but a plow with a sleeve hitch will connect right up to a 716. Check this out > http://www.simpletractors.com/models/700_series/10_plow.htm As for a loader, check this out > http://www.simpletractors.com/parts/l-12/l-12_loader.htm Also check the "Johnny Bucket" > http://www.simpletractors.com/sponsors/johnny_products.htm

Share this post


Link to post
Share on other sites
jackcobb
Your simplest solution on the plow is to buy a Brinley. I'd get a 10" for your 716, although there is an 8". Used will be $75 or so. Then comes the hard part. If your lucky, your 716 has the rear lift kit on it. If not you'll have to locate one. Then you need the hitch from the plow to the tractor. They don't sell these new anymore, but can piece together from parts. But be prepaired to get out your checkbook if you go that route. I was quoted $165. I lucked out on E-bay for $35. Good luck!

Share this post


Link to post
Share on other sites
thedaddycat
You might just find one, like this one that was sitting on the curb. The tiller and Serf in the pic show the size of this bad boy.... HEY PAUL!!!!! You can have this one for free instead of making a two-bottom rig.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • tractorfreak3
    • roey94
    • s_stephen
    • TTDE419
    • Jim J
    • BLT
    • PhanDad
    • redbeard
    • Bird76Mojo
  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • Dean McFadden

      Dean McFadden

      Good morning peeps! I’m always searching for helpful information with my AC collection. Hope to find out new information and pass on my own experience in restoration. Here are some pics of my babies. I’m still looking for front rims for the 410 so yesterday I put the 310 wheels on took it for a drive. Working pretty good but still needs some carb work. Gotta get the 310 running next. Have a great day!😁
       

      · 1 reply
    • thedaddycat

      thedaddycat  »  SmilinSam

      It's in pretty sad shape, but yes I have a yellow plastic cap that I'm fairly certain is what you need. PM me your details and I'll get it out to you.
      · 0 replies
  • Adverts

×