Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
cranemech

info for newbie

Recommended Posts

cranemech
Hi All, I've just discovered this site and it is a wealth of info. I have the opportunity to purchase an ac620 with front loader ($750.00) and tiller ($250). The tractor ran when I went to check it out and checked the hydraulics, but during the inspection it died. Looks like the fuel pump died. The tractor has been sitting outside awhile and the paint is in rough shape. The tiller shaft seal is leaking and the tines have been ground down to nothing and would need to be replaced. My questions for the accumulated knowledge here are 1) does this seem to be a decent price 2) is it better to go with an original style fuel pump or is an electric fuel pump a better option 3) what would all new tines for the tiller run approx. I plan on using the tractor for small odd jobs around my place (approx 1 acre) garden a little landscaping, etc is this tractor adequate ? Thanks, chad

Share this post


Link to post
Share on other sites
Kent
It's not a decent price at all ... it's more like stealing it.... The loader is alone is worth the $1000 total price if it's in decent working condition. The foot-draggin' Clubhouse Custodian...

Share this post


Link to post
Share on other sites
PatRarick
Take it and run, but stay ahead of the law. The tiller will need 28 tines (14 lefts and 14 rights) at about $9 each. This unit should be more than adequate for your needs. Even with new tines and a fuel pump, you are way, way ahead of the game. Pat

Share this post


Link to post
Share on other sites
HubbardRA
Go for it. I am planning to build a loader, and just the metal and hydraulics for the loader is going to cost more than $500. If I had the chance I'd take it home with me. Rod H.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • steve-wis
    • kwt
    • a_sannine
    • MARK (LI)
    • AC710
    • BenB
    • Bob DeVarney W1ICW
  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • Dean McFadden

      Dean McFadden

      Good morning peeps! I’m always searching for helpful information with my AC collection. Hope to find out new information and pass on my own experience in restoration. Here are some pics of my babies. I’m still looking for front rims for the 410 so yesterday I put the 310 wheels on took it for a drive. Working pretty good but still needs some carb work. Gotta get the 310 running next. Have a great day!😁
       

      · 1 reply
    • thedaddycat

      thedaddycat  »  SmilinSam

      It's in pretty sad shape, but yes I have a yellow plastic cap that I'm fairly certain is what you need. PM me your details and I'll get it out to you.
      · 0 replies
  • Adverts

×