Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

16hp Briggs


AdamF

Recommended Posts

I went to my dealer today to get some prices on parts. Engine model is 326437-I think. He wanted spec#, which I do not have.We guessed the last time I rebuilt this engine. This tractor originally had a 13hp(30000 series), but was replaced with a 16hp(32000) long block-has 13hp sheetmetal so those #'s are no good.Does anyone have an idea on a spec #, or approximately how old this engine is? The block has the oil filler hole in the side of the block instead of the sump. Also there is no provision for points and no eccentric on the cam for the plunger to ride on, so it is equipped with Magnetron ignition. Any ideas anyone?Thanks.AdamF
Link to comment
Share on other sites

Adam if you can get actual model or tractor, this would be a start. 7016-H means 16hp engine hydro.
Then we can zero down on what was right engine and take it from there
Link to comment
Share on other sites

From the way you describe the eng. it sounds exactly like the one we have in our 3112H I got the eng out of a junk trac and ours is an '85 model as it has magnetron and the side dipstick--- model 326431 type-2582-01 code 8506271 Hope this can help you out getting parts! dlc
Link to comment
Share on other sites

Thanks dlc. That really helps a bunch. Ifigured the engine was probably a mid 80's, but was never sure. Now I've got some #'s, which makes things easier. Thanks again! AdamF
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...