Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  

Need info on ac410

Recommended Posts

I have an ac410 I purchased over the winter.It has the shuttle speed transmission.I need the sizes of the belts and the idler pulley.I can only use forwards everythjing slips in reverse.I believe someone put the wrong size pulley on it.Alsoi would be interested in any attachments for this tractor.
Thanks Matt

Share this post

Link to post
Share on other sites
Hi Tim, I you have not had a responce yet. The only thing I can do is give you the place I know where you should beable to get the information. Try University Lawn Equipment,Inc.-located in Pontiac Mi. Phone# 248-3737220-and ask for Mark. He is one of the owners and a member of this club. If you might need parts he can also get those. Give him a try maybe he can help you out. Good Luck Jackl

Share this post

Link to post
Share on other sites
Matt, I believe the 410 is the continuation of the B series. Any B attachments will fit, these are usually the most available used. You'll find these in yellow for the Acs and red orange for the Simplicities. The attachment for your tractor were white to match the wheels and trim on the 410. Even the new Sovereign attachments should fit, but very expensive. Look on Simple Tractors under B attachments and all these should fit. If I'm wrong about the 410 somebody slap me. Tim

Share this post

Link to post
Share on other sites
Matt, The mower deck is different for the 300 and 400 series tractors. They were driven from the front shaft of the engine (with an electric clutch) vs. from the bevel gear box as the B series AC and many Sim tractors. The mount is close. You can make a deck from a 410 work on a soveign or B tractor with the jack shaft PTO (just twist the belt in the other direction) but I don't think you can make a deck from a B, 700,900 AC or 3000 or 7000 Sim work. The 410 discharges to the right instead of the left. Also the rear lift kit on the 300 and 400 used a larger 1 point shaft than the others??? This is my experience but I may have been dealing with an oddball. Good Luck. --mike--

Share this post

Link to post
Share on other sites
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • wddave
    • simplewrench
    • B10Dave
    • SmilinSam
    • Cityboy
    • lugnard
    • mike_sdak
    • smalljob
    • PGL
  • Today's Birthdays

    1. mjbarbero
      (64 years old)
  • Recent Status Updates

    • Paul M.Murphy

      Paul M.Murphy

      Hello glad I got on this site. I hope to upload a couple of photos of my Simplicity Broadmoor 
      Model 707 Tractor. I have replaced all the belts on it and installed a new ignition switch.
      Have a mower deck which was in poor shape , repaced a couple of bushings and welded the
      deck where there was some holes. The tractor and mower deck came from a friend and the 
      mower deck metal was getting pretty thin. Some new metal was put in it and we also undercoated the underside of the deck. This was done by my friend Greg Toulman.
      I have not put the mower deck on the tractor yet, waiting for Greg to come home and give me a hand. Can you please tell me if there is a manual for the mower deck and where I could get one.
      I would also like to get some moon wheel discs as well.
      I will try and down load some photos of the tractor when my wife shows me how to. 
      I really love driving this tractor and also how well it is made compare today's tractors, especially the flexible rear end and the rollers.
      Tell the next time 
      · 8 replies
    • jbrooks

      jbrooks  »  Talntedmrgreen

      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
  • Adverts