Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
Roy

Sickle Bar Swath Board Parts

Recommended Posts

Roy
Gang, I am working on drawings for the swath board, rod, and mounting bracket. I need dimensions and bend angle for the mounting bracket (P.N. 10 ). Also need someone who can look at the drawings versus the actual parts then tell me if I have the drawings correct or need to change some of the dimensions. Or, a volunteer who wants to make the parts from the drawings would work. It would be helpful if I could add the correct kind of wood to the swath board drawing. Please refer to the attached Simplicity parts book page. I am working on parts 9, 10, & 11. Thanks to all,[url="pop_download.asp?mode=Edit&dir=Roy&file=467"][/url]

Roy

Share this post


Link to post
Share on other sites
HubbardRA
Roy. I don't know exactly how these parts look. I think you can make the bracket just the way it looks. It can mount straight to the rear with the rear edge about 8 inches higher than the bar. The only purpopse is to prevent the cut grass from entertwining with the uncut grass. I have used them both ways. Only time the board was necessary was when putting up hay. Made the raking easier. Rod H.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×