Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
KennS

B-207 attachments

Recommended Posts

KennS
Hello all; I was just curious what other tractor attachments with interchange with my B-207.I thought i read that 100 and 200 series interchange. I have the cutting deck and a trailer.But would like a grader,snowblower and a leaf vac and what ever else i can find without altering the tractor. Thanks for your time Ken s

Share this post


Link to post
Share on other sites
arjr111
Welcome Ken, click on the link below the pic. to see what fits. There are alot of these snowthrowers out there. Also, check the classifieds on the site...Art [url]http://www.simpletractors.com/Main/what_fits.htm[/url]

Share this post


Link to post
Share on other sites
KennS
i dont get it. A. i cant find my model number just "B-207e" b. i didn't see anything listing 200 series in the "What Fits ?" I have a serial number from off the back but it don't match anything at this web site.It has a " Outdoors Products serial number Tag"And one on the mower deck also. Sorry i'm new to this.

Share this post


Link to post
Share on other sites
dtsr
KennS, welcome to the club. Go to the search option and type in 207. When that page loads, scroll down near the bottom and click on attachments. This will show some of the attachments that will fit.

Share this post


Link to post
Share on other sites
KennS
Sorry; THere is nothing listed for the 207 just a link to a page that has a mower deck mfg no 207 for a 9hp landlord tractor "32" ROTARY MOWER (Mfg. No. 207)" Attachments 11/01/02 04:24 PM -0700 15KB 52 http://www.simpletractors.com/simplicity/new_in_1964/attachments.htm What fits ? does 400 and 300 series And at X-Ref Table doesn't mention a 207 it just goes from 110 to 210. Allis-Chalmers Tractors and Attachments Usage Guide B-110 & 112 to B-210 & 212 does anyone know the MFG. NO. for a b-207?? perhaps i'll look at that route. Any one any clues? Thanks again

Share this post


Link to post
Share on other sites
mowerman1193
KenS, Welcome to the club,you have found a good source of info here. I don' t belive that the B207 has a cross to Simplicity.But they do accept the same attachments as the early Broadmoor (as far as I have read here) such as a Broadmoor 717.I do not know if the B207 has the rear PTO like the 728 Broadmoor but if it has that then you probably could use the rear attachments that the 728 use's.The MFG # for the 717 would be 990425 and for a 728 would be 990765.Below is a link to a little info and spec's on the B207.At the top right is a few more links as well. [url]http://www.simpletractors.com/models/b_series/b-207/b-207.htm[/url] mowerman1193

Share this post


Link to post
Share on other sites
KennS
thanks everyone. i found out a way to find out.I find the part number of the attachment and do a search for that part number. i saw that some of the attachments would fit from a homestead 8 i think and b-208s.I have to research further. I have no rear pto or cat hitch.I don't want to butcher the tractor to much.I have a torch and welder so i can pretty much make anything work:-). But anyways i found this B-207e in a garage.I couple scratches but all is there.Its orange and cream color.THe seat is slightly cracked.Ha even the stickers and paint are still on the engine.And the trailer is white and beat up.JUst my price Free. Thanks again for your help Kenny S

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • GregB
    • Sw1966
    • CarlH
    • RAC
  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • Dean McFadden

      Dean McFadden

      Good morning peeps! I’m always searching for helpful information with my AC collection. Hope to find out new information and pass on my own experience in restoration. Here are some pics of my babies. I’m still looking for front rims for the 410 so yesterday I put the 310 wheels on took it for a drive. Working pretty good but still needs some carb work. Gotta get the 310 running next. Have a great day!😁
       

      · 1 reply
    • thedaddycat

      thedaddycat  »  SmilinSam

      It's in pretty sad shape, but yes I have a yellow plastic cap that I'm fairly certain is what you need. PM me your details and I'll get it out to you.
      · 0 replies
  • Adverts

×