Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

46" Sickle Bar Cable Lift Bracket Info Needed


BillC

Recommended Posts

I am in need of dimensional information so I can fabricate the cable lift bracket (otherwise known as pulley mounting assembly in the parts lists of the Simplicity owners manual) that mounts to the tractor frame on the front right-hand side, by the engine, ahead of the lift mechanism. Can someone who has a 46" sickle bar with the original pulley mounting assembly, Simplicity part #101112 or #172126, please make a drawing and post it along with the swath board drawings?
Link to comment
Share on other sites

Bill, I have the original bracket on my B-210. I do not have the software or experience to make a drawing to post but if you do not get the info you need you are welcome to come down and look at mine and make your own drawing. I live in Crystal Lake,Illinois. I was in Waukesha last Sunday, it takes about one hour fifteen minutes to get there from here (Waukesha County Airport). Good Luck, Rob
Link to comment
Share on other sites

Bill, When I made mine I used 1-1/4"x1/4" flat stock. Just mark holes as needed. Position pulley as determined by cable length used.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
  • Who's Online (See full list)

    • oldsarge
    • gwiseman
    • StanD
    • TheFlash300
    • Darl Swartz
    • Tarheel
  • Recent Status Updates

    • gwiseman

      gwiseman

      Site programming updates were made 3/23/2024. As a result some things have changed including dues payment options. We will continue maintenance and work with technicians to regain credit card payment option and clear up minor challenges. On positive it appears attaching pictures is now easier. Good day. Gene 
      · 1 reply
    • gwiseman

      gwiseman

      Site maintenance scheduled to begin 10a CDT on 3/16/24
      · 0 replies
  • Adverts

×
×
  • Create New...