Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Hitch adapter


thedaddycat

Recommended Posts

Is Rob still producing those? Here's the one it's patterned off of... [img]http://www.simpletractors.com/images/2_into_1/trailer_hitch_small.jpg[/img]
Link to comment
Share on other sites

The grooves are for the rear lift pivot rod to hold the top when rear mounted.

The front was just a little off.

So a quick session with the hitch adapter tool fixes that.

When pinned in place the gap off the front face of the axle looks a little wide, but this front axle is a bit "tweaked". I'll try it on several tractors, and may weld up and re-drill the pin holes for a tighter fit if it's too loose.

Link to comment
Share on other sites

So much for the action shots! Do you have any idea how hard it is to jump off and get a pic before you hit a tree???...... lol. The camera flashed to get a light reading and I thought it took the pic so I moved when it was taking the real pic a half second later.
Link to comment
Share on other sites

Sure! That's your story. Sounds like rather than admit to commiting an unsafe act you blame it on technology! :D Steve
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...