New engine wiring

[Guest]

I'm reassembling an older 728 that I've put a newer Tecumseh 11 hp engine into. This engine has starter motor and I'm assuming uses a stator in the flywheel to charge the battery and ignition. Can someone share a wiring diagram with me? The original Briggs engine used a generator arrangement.

[FiremanRon]

Wiring is fairly simple. However you need to know if you have a single wire or two wire system on your Tecumseh. Also does your Broadmoor have headlights. PS: your hood won't fit or will your grill. Been there, done that with with 12 HP Briggs. If it is a single wire, most likley this is charge wire and run it thru the ameter back to the battery just like th bat term from regulator. If it is two wire, one wire is DC and one wire is AC . The DC is for the battery and AC for headlights. The head light circuit will have to be separated from the battery and connected to AC side. Generally try to cage the battery and use the headlights is to much for the charge circuit to handle[A href='http://www.simpletractors.com/gallery/hot_broadmoor.htm']http://www.simpletractors.com/gallery/hot_broadmoor.htm[/a]