AC, B-12 Tiller help needed

[ron217]

Hi All I'm the new owner of a B-12 complete with mower deck, snow plow, and a tiller, almost complete. My problem is this. There is no belt drive system from the center PTO to the pulley on the tiller. I looked at the attachment section and found a picture of a tiller mounted but it doesn't show enough for me to build what is needed. There must be a clutching system as well as a speed reduction system. I would appreciate some help with what I need and is there a parts/owners manual available for the tiller? thanks in advance Ron Frost Kersey, PA

[BLT]

Go here. about half way down is a nice graphic of what you would need. http://www.simpletractors.com/club2/topic.asp?TOPIC_ID=16380

[arjr111]

Hi Ron, if it would help I can take a picture of my B-10 tiller set up and email them to you.

[SmilinSam]

Someone had one (tiller pulley assembly) for sale in the classifieds recently. [url]http://www.simpletractors.com/club2/classDetail.asp?id=3030[/url] All the 32" tiller drive assemblies are the same from what I've seen. The ones on the 112 would use a longer belt to the pulley on the bevel gear box and belt release bracket mount may be slightly differen, otherwise all should be the same as the earlier B-series. Would be a whole lot less complicated to buy one than build one. I know, because I did build one once, and even with the correct one at hand for a pattern it wasn't easy.....and really wasn't all that great when done either....

[ron217]

Thanks Guys for the help. this is a great bunch of people. Happy Easter to all Ron Frost