AC 310 rear tiller?

[MPAQALLIS]

just wanna know what kind of tiller i can use, i.e.manufacturs that i may use on my tractor. thanks MPAQALLIS

[MPAQALLIS]

well i have 2 more questions: 1. where can i get a replacement seat, the whole shabang. seat and metal back. 2. i would also like to know the catagory of my 3 pt hitch, and how i can make or buy an adapter from the 3 pt hitch to a sleeve hitch. thanks MPAQALLIS

[Chris727]

I've never seen an acutal three point for a 300 series Allis, sounds custom, i've seen a custom 3pt on a 3012 soveriegn I think but it was a custom set up, the 620's had a category zero hitch if memory serves me correctly. -Chris

[MPAQALLIS]

this tractor is till totaly stock. i just put 3 pt cause the lift on top and 2 pins on the bottom(about 8 inches apart). thanks MPAQALLIS

[UCD]

The AC 300 and 400 had there own tiller as the hitch was a little different but I believe the can be adapted to take the simplicity tillers. There is no category group for Simplicity and AC hitches as they are unique to Simplicity built tractors. As for the sleeve hitch do a search in talking tractors forum using key words one point hitch, sleeve hitch, Brinly hitch. There are quite a few posts with diagrams and pictures as well as planes for one. Also look in Simple trACtors under do it your self.

[Chris727]

Ok well I don't know that that qualifies as a category of 3pt. Dont know which tiller would fit but for sure any of them for a 300 or 400 series allis would work, I know the early ones from the B-10's and early landlords wont work but any that work with a cone clutch probably work, very hard to describe. You should look at the cross reference off the simpletractors tab. You won't need a sleeve hicth to use a tiller but you would need it for most Brinly, Sears, or Agri-Fab attachments such as plows, cultivators, disks, blades etc. Welcome to the club! Is this your 1st Allis? Good to see more young people here. -Chris

[acjohn]

Have a tiller from a 716 Allis that fits my 410S perfectly. The 300 and 400 series are nearly identical. All you need is the tiller idler pulley group and you should be all set. Since you don't have a clutch on your BGB, you will need the handle to move the tiller idler and tension the belt. I made a handle and linkage. (See more recent post on tiller idler for pics). I also have a sketch someone sent me for idlers and bracket.