Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
bubba_t _flubba

transmission control lever

Recommended Posts

bubba_t _flubba
I have a H7016 That I think is the greatest. But there is one thing that I have not been able to figure out yet. When the transmission control lever is in the middle (starting position) the tractor actually goes in reverse. Is there anyway to adjust this so that neutral is actually neutral. Any help would be greatly appreciated.

Share this post


Link to post
Share on other sites
Kent
There is a linkage adjustment that's described in the Large Frame Tractor maintenance/repair manual, and also in the Allis-Chalmers 716H Owner's Manual, but I don't think it's in the normal Simplicity owner's manual (don't know for sure). I suggest you download one of those and adjust the linkage. It's a bit too complicated for me to describe (especially from memory) without a lot of words and pictures... :)

Share this post


Link to post
Share on other sites
Dutch
Kent's right. Proper adjustment is a little complicated, but well worth doing. There is also a very important linkage spring that is often missing. Linkage wear or lack of lubrication can also present a problem. Some of the dealers recommend installing a block in another linkage spring to eliminate the problem. I modified the linkage on one of my tractors to disengage the hydro when the parking brake is applied. Search the archives for "neutral". You'll find lots of info.

Share this post


Link to post
Share on other sites
UCD
Hydrostatic Transmission Neutral Adjustment Paragraph 4   A thu D   Fig 22 & 23 [img]http://www.simpletractors.com/club2//attach/UCD/HydrostaticNeutralAdjustment.jpg[/img] [img]http://www.simpletractors.com/club2//attach/UCD/HydrostaticNeutralAdjustmentcont.jpg[/img]

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    There are no registered users currently online

  • Today's Birthdays

    1. 9934059
      9934059
      (71 years old)
  • Recent Status Updates

    • jbrooks

      jbrooks  »  Talntedmrgreen

      Josh
       
      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
  • Adverts

×