Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  

Simplicity 4041 charging system

Recommended Posts

Hey guys its me again. Just bought a 4041 without engine. I also bought an Onan 16HP to go in it, it runs great. Hey, I'm going to use it, not rebuild it.I think the 16 will do what I need to do. Light mowing and pulling trailer around property. I'll keep my 620 for more fancy work. What I need to know is what I need to do to convert late model charging system to charge battery in 4041. Most all wiring in 4041 is in really bad shape. I just want to charge battery. I don't care if the radio plays or not. Guess I need a schematic of a simple hookup for the 16 to charge the battery. I don't have the regulator for either one. Just not sure how I might hook it up. I don't care if I need to turn on more then one switch to get the thing to run. I'll send you all a pic of the thing when I get it going. By the way the 4041 has been sitting in a barn for 26 years and most sheet metal is in bad shape. Hour meter shows 214 hrs. Hope this is true. Current owner has no idea where the original motor went. The original owner passed some years ago. Got both for $350, may have been a god buy???

Share this post

Link to post
Share on other sites
Welcome to the club you can use the search functions here to find the answer to most questions as the have been discussed and answered before here is a post last week and has wireing diagrams. [url="http://www.simpletractors.com/club2/topic.asp?TOPIC_ID=16725"]720/9020 wiring problems[/url] You can all so get the Operators manual,partes manual and repair manuals here This site has all the Manuals you could ever want. This will require some time and effort on your part Use Part# 100,200,300, ETC. to 900.Then you will have to scroll thought the list to find the one you want. They all have discriptions. All of the repair manuals are here. Part# 100 OPERATOR'S MANUALS Part# 200 INSTALLATION INSTRUCTIONS,OPERATOR'S MANUALS Part# 300 DEALER SETUP INSTRUCTIONS Part# 400 PARTS MANUALS Part# 500 REPAIR MANUALS Part# 600 Safety Section,INSTALLATION INSTRUCTIONS Part# 700 Neutral Adjustment Guide,Electrical Information Manual, Product Service Bulletin Book Part# 800 Misc. Part# 900 Service Bulletin Book,Limited Warranty Simplicity Technical Publications Document Search Engine. http://www.simplicitytechpubs.com/v_techpubsearch.php

Share this post

Link to post
Share on other sites
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • SmilinSam
  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • jbrooks

      jbrooks  »  Talntedmrgreen

      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
  • Adverts