Tiller Belt Cross....

[Bunky]

I'm in need of a tiller drive belt...2025641 I tried to look it up on Jacks site it came up able to locate.. Is there another number or does someone know the size off hand??????^

[BLT]

Try a 154273. Should be 42.3" drive belt. I did a sort of all the Simplicity to Allis numbers that on the web site to vice versa and this is what I came up with. This shows as a drive belt for a B-10 and the second belt of the older two belt tiller drives. Thew book says HL which I can't find but mine looks to be a 5/8" cross section belt.

[UCD]

990174 32" Tiller Drive Belt# 154273 Length 42.3" Type HL Trans. Drive Belt# 152017 Length 44.9" Type HB Hl belt is 1" wide by 1/2" thick Belt cross section chart http://www.simpletractors.com/club2/topic.asp?TOPIC_ID=11660 [img]http://www.simpletractors.com/club2/attach/UCD/Belts12.jpg[/img]

[BLT]

Maynard, download 990455 tiller and then go to page 84 of belt book and read it thru. Both call for same belt part number, which are neither capable of handling a 1" wide cross section belt, especially a 42.3" long belt. The belt book says belt "HL" and there is nothing. What shows is "HI" Simplicity must have missed it and it should have been HB, 21/32" as shown in some of the stuff thats on the web site.

[UCD]

Bob What I posted was cut and pasted from the 2002 belt and blade manual. This is screen shot from the 32" tiller manual. Maybe it should have been 4L

105122 Length 55.9" Type HB 105280 Belt for 3012 is not listed this is screen shot of belt book

[stinkie]

What type of tractor does this go on? If it is similar to mine (landlord 101, tiller with NO idler pulley) both my belts are 42" (transmission drive for LOW 10" pulley and also for the tiller drive. If I knew which tractor you need it for, I might be able to help you out from experience. I had to do a lot of belt searching. I bought about five belts and took the ones that didnt fit back........

[gregc]

Brian, Bob is right about the belt, should be #154273. I don't think Jacks database has Allis numbers in it so you have to go to the Simplicity to Allis-Chalmers Parts Cross-Reference on Simple trACtors site to cross ref the numbers. http://www.simpletractors.com/parts/parts_x-ref.htm

[Bunky]

The tractor is Simplicity 2010..... I got the one belt 105122 to come up, I just couldn't find the other belt...