Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  

Homelite Front Electric PTO

Recommended Posts

I have a '72 Homelite T12 tractor that's been in the family since new. Up until now, I've been able to get parts to keep it mowing and blowing snow faithfully. But the front electric PTO seems to be unique to the Homelite tractor and Simplicity only sells the coil assembly as a replacement part. I bought one of those 6 years ago and have been on the lookout for the rotating parts (especially the "half" with pully) ever since. Both the mower deck and snow thrower use the front PTO, so without it, only the rototiller and plow blade are usable. The "pully half" is now completey shot - and no longer fixable. I can't find a single Homelite "parts tractor" in the area. Per Simplicity, I understand Warner Electric supplied the OEM electric PTO (part number 5208-752-002), but I haven't had any luck getting anyone at Warner Electric to help. Does anyone know where a replacement can be had? PS - I have an original "Parts List" manual for the tractor (T-10,T-12&T15) and "Instructions & Parts List" manual for the rotary mower (42" Mfg No. 280 and 48" Mfg No. 281). I could scan them and send them for posting on the web site if desired.

Share this post

Link to post
Share on other sites
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • Bill725
    • rbstuartjr
    • abu507
    • s_stephen
    • Brettw
  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • jbrooks

      jbrooks  »  Talntedmrgreen

      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
  • Adverts