Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

  • 608LT/611LT Specifications - Page 1


    Kent
     

    608 LT
    I.D. No. 169019000001 & Up I.D. No. 169026300001 & Up

    611 LT
    LT I.D. No. 169034500001 & Up

    ENGINE    
    Make Briggs & Stratton Briggs & Stratton
    Model No 191707 252707
    Horsepower 8 (6.0 kW) - 3600 RPM 11 (8.3 kW) @ 3600 RPM
    Cycles 4 4
    Cylinders 1 1
    Bore 3" (76.2 mm) 3-7/16" (87.4 mm)
    Stroke 2-3/4" (69.9 mm) 2-5/8" (66.5 mm)
    Displacement 19.44 cu. in. (319 cm3) 24.36 cu. in. (399 cm3)
    Crankshaft Vertical Vertical
    Electrical System    
    Alternator    
    Battery  12 Volt - 32 Amp.- Hr. (Automotive) 12 Volt - 39 Amp. - Hr
    Ignition Key Switch Key Switch
    Ignition:     
    Type

    Flywheel Magneto w/Key Switch
    Dust Proof Breaker Enclosure Under Flywheel

    Flywheel Magneto w/Key Switch
    Governor:    
    Type Adjustable, Mechanical, Running in Oil Adjustable, Mechanical, Running in Oil
     Range  1800 - 3400 RPM 1750 - 3400 RPM
    Air Cleaner Sealed Joint Housing, Oil Foam Element Sealed Joint Housing, Oil Foam Element
    Element Reusable Polyurethane Foam Reusable Polyurethane Foam
    Crankcase:    
    Breather Ventilated through Carburetor  
    Lubrication Gear Impeller System Gear Impeller System
    Oil Capacity 2-1/4 Pints (1.1 litres) 3 Pints (1.4 litres)
    Fuel Tank:    
    Material High Density Polyethylene High Density Polyethylene
    Fuel Level Gauge  Built into Filler Cap Built into Filler Cap
    Capacity  2.2 Gallons (8.3 litres) 2.2 Gallons (8.3 litres)
    Muffler Quiet Compact Low Back Pressure Lo-Tons
    TRANSMISSION    
    Type All Spur Gear, Running in Oil Bath All Spur Gear, Running in Oil Bath
    Material:    
    Gears  Heat Treated Heat Treated
    Shafts Hardened and Ground Hardened and Ground
    Bearings Needle Type Roller Needle Type Roller
    Lubrication:    
    SAE 90 Oil Capacity 1-1/2 Pints (.7 litres) 1-1/2 Pints (.7 litres)
    Speeds: 3 Forward, 1 Reverse 3 Forward, 1 Reverse
    1st  1.55 MPH (2.49 km/h) 1.55 MPH (2.49 km/h)
    2nd  3.04 MPH (4.89 km/h) 3.04 MPH (4.89 km/h)
    3rd 4.48 MPH (7.21 km/h) 4.48 MPH (7.21 km/h
    Reverse 2.13 MPH (3.43 km/h) 2.13 MPH (3.43 km/h)
    Differential Gear Type Gear Type
    CHASSIS    
    Frame  Channel, Heavy Gauge Steel Channel, Heavy Gauge Steel
    Engine Mounting  Above Front Axle Above Front Axle
    Pivot Point Location  At Front Axle At Front Axle
    Rear Wheel:    
    Tire Size  18 x 8.50 x 8 18 x 9.50 x 8
    Pneumatic Inflation Pressure 6 - 8 PSI (41 - 55 kPa) 6 - 8 PSI (41 - 55 kPa)
    Front Wheels:    
    Tire Size  13 x 5.00 x 6 13 x 5.00 x 6
    Pneumatic Inflation Pressure

    12 - 15 PSI (83 - 103 kPa)

    12 - 15 PSI (83 - 103 kPa)
    Bearings Sintered Iron with Grease Fittings Sintered Iron with Grease Fittings


    Source: 600 LT Series Tractors Service Manual, No. 9003479, 11/79, courtesy of Larry Comer


      Report Post


    User Feedback

    Recommended Comments

    are there any online manuals or tutorials on the removal/installation of the snowblower attachment and the mowing deck for the Allis-Chalmers 611 LTD 5-speed? Thank you patrickdodge2000@yahoo.com   Patrick

    Share this comment


    Link to comment
    Share on other sites


    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now


×