Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

  • 716-H Specifications


    Kent

    Specifications: AC Model 716H Tractor

     

    Engine

    Kohler, Model K341S

     

    Capacities

     

    Type

    4 cycle, single cylinder, air cooled

     

    Engine crank case

    2 quarts

    Horsepower

    16

     

    Fuel tank

    3 gallons

    Bore and Stroke

    3.75” X 3.25”

     

    Hydrostatic Transmission

    3 to 3-1/2 quarts Allis Chalmers Power Fluid 401 (Dextron)

    Displacement

    35.89 cubic inches

     

    Bevel Gear Housing

    Fill to end of dipstick SAE 90

    RPM

    3600 RPM at Rated Horsepower

     

       
    Crankshaft Balanced - 1" Diameter with 1/4" Keyway   Dimensions  
    Starter Gear Driven Electric Starter   Height @ Steering Wheel 39.25"

     

    Governor

     

    Mechanical flyweight with external adjustment

     

    Height @ Instrument Panel 35.5"

    Electrical System

     

    15 AMP, Flywheel Alternator, Solid State Regulator-Rectifier

     

    Width Overall 37.5"

    Ignition System

     

    Battery Ignition with Breaker Points
      Length Overall

     67.0

    Battery

    Allis Chalmers, 45 AMP Hour

     

     

    Wheel Tread - Front

    29.0”

    Air Cleaner

     

    Replaceable Dry Element

     

    Wheel Tread - Rear

    27.0”

    Ground Drive     Clearance - Front Axle 8.0"
    Clutch Foot Operated V-Belt Clutch Between Engine and Transmission   Wheel Base 48.1"

    Transmission

    Hydrostatic Drive with Variable Displacement Axial Piston Pump and Fixed Displacement, Reversible Axial Piston Motor.

     

    Turning Radius

    30.5" to inside of rear tire”

    Speeds @ 3600 RPM - Forward - Variable up to 7 MPH Reverse - Variable up to 4 MPH      
    Continuous range of ground speeds in forward or reverse without clutching or shifting.

    Differential

     

     

    Planetary Spur Gear - Controlled Traction

     

    Implement Lift Manual Lift Standard. Electric Lift Available for Field Installation.

    Steering

    Bevel Gear - Spindle Lever Type Linkage - 4.66:1 STEERING GEAR RATIO - 4.14 OVERALL RATIO

     

    Center PTO Mechanical Cone Clutch and Belt Drive to Center and Rear Mounted Implements is Standard.

    Brakes

    Drum and Band on Transmission Shaft - Foot Operated; Cam Lever Parking Brake - Hand Operated

     

    Head Lights Standard

    Tire Size & Pressure

     

     

       
    Rear

    23-10.50 X 12 (8 PSI)

     

       

    Front

    16-6.50 X 8 (10 PSI)

     

       

     

    Source:  AC Operator's Manual, MODELS 710 - 712S - 712H -716H Lawn & Garden Tractor, Part Number 1656140, November 1975.  Also, AC Operator's Manual, MODELS 710-6 Speed,  712S,  712H, 716-6 Speed, 716H and 718H Lawn & Garden Tractors, Part Number 1664443, February 1978.

     

    User Feedback

    Recommended Comments

    There are no comments to display.



    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...