Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

  • Sign in to follow this  

    808 GT Tech Specificationss


    Kent

    Specifications:  AC Model 808GT Tractor

    Engine

     

     

     

    Model

    Briggs and Stratton, Model NO:191707

     

    Overall Width

    35.1 (889)

    Type Gasoline, 4 cycle, single cylinder, vertical crankshaft

    Horsepower @ 3600 RPM

    8 (5.97kw)

      Height To top of steering wheel: 39 inches (991 mm)
    To top of engine cover: 33 inches (1156 mm)

    Bore and Stroke

    3” (76mm) X 2-3/4” (70mm)

     

    Wheel Base

    45.5 inches (1156 mm)

    Displacement

    19.44 cubic inches (399cc)

     

    Shipping Weight With Mower

    520 lbs. (236 kg.)
    Electrical System

    Dual circuit alternator, D.C. charging circuit, A.C. light circuit

     

      12 volt-32 Amp. Hr. Automotive battery

     

    Ammeter Key ignition  
      Starter: 12 volt gear drive  
      Dual headlights  
      Separate indicator lights for safety interlock switches  
    Ignition Type: Flywheel magneto w/key switch  
      Dust proof breaker enclosure under flywheel  

    Governor

    Type: adjustable, mechanical, running in oil.
    Range: 1750 to 3400 R.P.M (approximately)

     
    Air Cleaner Sealed joint housing, oiled foam element  
    Crankcase Breather: ventilated through carburetor  
      Lubrication: geared impeller system  
      Oil capacity: 2-1/4 pints (1.1 L)

     

    Fuel Tank Material: high density polyurethane  

     

    Fuel level gauge built into filler cap

     

      Capacity: 2.2 Gallons (8.4 L)  
    Muffler

    Quiet compact, low back pressure

     
    TRANSAXLE

     

    Type All spur gear, running in oil bath

     

    Material Gears: heat treated  
    Shafts: hardened and ground
    Bearings: needle type roller
    Lubrication SAE 90 oil capacity: 54 ounces (1.6 L)  
    Speeds

    Three forward, one reverse

     

    Speeds @ 3600 R.P.M

     

    Low: .9 mph (1.4 kph)  
    Second: 2.3 mph (3.7 kph)
    High: 3.9 mph (5.8 kph)
    Reverse: 3.9 mph (5.8 kph)
    Differential All gear, controlled traction type  
    CHASSIS  
    Frame Channel, heavy gauge steel

     

    Power takeoff points: front and rear
    Rear Wheels Pivot point location: front axle

     

    Tire size:18 X 9.5 - 8 terra-tread (tubeless)
    Air Pressure: 6 to 8 p.s.i (41-55 kPa)
     
    Front Wheels Tire size: 15 X 6.00 - 6

     

    Air pressure: 12 to 15 p.s.i (41-55 kPa)
    Bearings: sintered iron with grease fittings

    Accessibility

    Hood tips forward, seat tips back, for accessibility

     

       
    Seat

    Type: bucket, high back

     

    Adjustable to suit different size operators
    Turning Radius

    Inside rear tire: 25 inches (.635mm)

     

    DIMENSIONS  
    Overall Length 63.5 inches (1613)  

     

    Source:  AC Operator's Manual, MODEL 808GT and 810GT Lawn & Garden Tractor, Part Number 1656827, September 1976.

     


      Report Post
    Sign in to follow this  


    User Feedback

    Recommended Comments

    There are no comments to display.



    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now


×