Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

  • Sign in to follow this  

    Tractor Specifications


    Kent

    900 SERIES TRACTOR SPECIFICATIONS (1980 models)

    ENGINE

    For engine specifications see Engine Section.

        GROUND SPEED - HYDROSTATIC
    Forward: Variable, up to 7 mph (11 km/h) at 3600 rpm
    Reverse: Variable, up to 4 mph (6.4 km/h) at 3600 rpm
    ELECTRICAL GROUND SPEED - SHUTTLE
    Starter: Electric gear drive Gear Forward or Reverse
    Ignition: Battery ignition with breaker points 1
    2
    0.96 mph (1.5 km/h)
    2.3 mph (3.7 km/h)
    Electric System: 15 amp flywheel alternator, solid state rectifier-regulator, 12 Volt, 45 amp hour battery 3
    4
    3.7 mph (5.9 km/h)
    5.1 mph (8.2 km/h)
    CAPACITIES - ALL MODELS GROUND SPEED - SIX SPEED
    Engine Crankcase Oil: See Engine Section Gear Lo-Range Hi-Range
    Bevel Gear Box: Fill to end of dipstick with Allis-Chalmers Power Fluid 821 1 0.7 (1.1 krn/h) 1.6 mph (2.5 krn/h)
    Transmission Gear Case - Shuttle & Six Speed: 3.5 pints (1.6 litres) of Allis-Chalmers Power Fluid 821. 2 1.7 (2.7 km/h) 3.7 mph (5.9 km/h)
    3 2.8 (4.5 k m/h) 6.1 mph (9.8 km/h)
    Final Drive Gear Case - Hydrostatic: 3 qts. (2.8 litres) of Allis-Chalmers Power Fluid 821. Reverse 1.5 (2.4 km/h) 3.2 mph (5 km/h)
    Fuel Tank: 3 gallons (11 litres)  
    STEERING - ALL MODELS DIMENSIONS - ALL MODELS
    Type of Linkage: Bevel gear - Spindle lever type Height at Steering Wheel: 39.7" (1008 mm)
    Steering Gear Ratio: 4.66:1 Height at Dashboard: 35.7" (907 mm)
    GROUND DRIVE - HYDROSTATIC Width: 36.9" (953 mm)
    Length: 70" (1778 mm)
    Clutch: Foot operated V-belt clutch between bevel gearbox and transmission Front Wheel Tread: 30" (762 mm)
    Rear Wheel Tread: 27" (686 mm)
    Transmission: Air cooled, hydrostatic with variable displacement axial piston pump and with fixed displacement, reversible axial piston motor. Free wheeling valve for maneuvering of vehicle without starting engine. Front Axle Clearance: 8" (203 mm)
    Wheel Base: 50.7" 0 270 mm)
    Front Tires: 16 x 6.50 x 8
    Rear Tires: - 12 HP, & 14 HP: 23 x 8.50 x 12 
            16 HP, 17 HP & 19 HP: 23 x 10.50 x 12
    Transmission Oil Filter - 12 H.P., 16 H.P., 17 H.P., & 19 H.P. Spin on cartridge type oil filter in charge pump suction line - 25 micron rating. Turning Radius: Inside rear wheels - 32 
       
    Outside front wheels - 85
    Final Drive: Hardened spur gears, rolling contact bearings MOWER
    Differential: Planetary spur gear, controlled traction. Effective Cutting Width - 42": 42" (1067 mm);  48": 48" 0 219 mm)
    GROUND DRIVE - SIX SPEED & SHUTTLE Overall Width w/Deflector - 42": 55" (1397 mm)  48 ": 61 " (1549 mm)
    Clutch: Foot operated V-belt clutch between bevel gearbox and transmission. Cutting Height: Adjustable from 1-5/8" to 3-1/8" (41 to  79 mm)
    Transmission - Six Speed: Sliding spur gear with 6 speeds forward and two reverse. No. of Blades: 3
    Transport Clearance: 3" (76 mm), maximum (low cut)
    Transmission - Shuttle: Differential shuttle clutch drive to transmission with forward - reverse control. Sliding spur gear with 4 gear ratios - hardened spur gears, rolling contact bearings  

    Differential: Planetary spur gear, controlled traction

     

    Source:  AC Operator's Manual, Model 900 Series, Part No 1667535, August 1980

     

     

     

     


      Report Post
    Sign in to follow this  


    User Feedback

    Recommended Comments

    There are no comments to display.



    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now


×