Click for a closer view
L-12 hydraulic loader
for Allis-Chalmers lawn and garden tractors
The all-hydraulic Allis-Chalmers L-12 loader is ideally suited for light commercial and farm use. It handles four cubic feet of loose material at a time . . . lifts 300 pounds to a height of more than five feet . . . has 500 pounds of breakout force to give you a full bucket every time.
The loader main frame is attached to a sub-frame mounted on the tractor, making it easy to remove the loader when you want the tractor for another job. Center mounted equipment can be used on the tractor without removing the loader.
Hydraulic reservoir is built into the frame for protection and maximum cooling of oil. Combination hydraulic pump and two-spool control valve is belt driven from the front PTO of tile tractor. Alignment problems are eliminated because there's no direct coupling to PTO shaft.
SPECIFICATIONS | ||||
Breakout force |
500 lbs. |
|||
Lifting capacity to full height |
300 lbs. |
|||
Clearance at full height |
63-1/2" |
|||
Maximum dumping angle at full height |
45 ° |
|||
Clearance with bucket dumped 45 ° |
49-1/2" |
|||
Reach with bucket dumped 45 ° |
20" |
|||
Reach with bucket on the ground |
35" |
|||
Digging depth below ground level |
1-1/2" |
|||
Cycle time: |
Raise |
3-1/2 seconds |
||
Dump |
2-1/2 seconds |
|||
Lower |
2 seconds |
|||
Bucket width |
42" |
|||
Heaped capacity |
4 cu. ft. |
|||
Bucket and lift control |
hydraulic |
|||
Hydraulic system: |
||||
Pump capacity |
1-1/2 GPM @ 2000 RPM |
|||
Relief valve setting |
1500 PSI |
|||
Hydraulic cylinders (bore/stroke/ rod diameter) |
||||
Bucket, double acting |
1-3/4" x 9" x 3/4" |
|||
Lift, single acting |
1-1/4" x 12" x 1-1/4" |
|||
Reservoir capacity |
2-1/2 qts. |
|||
Oil filter |
40 micron element |
|||
Shipping weight |
353 lbs. |
|||
|
||||
FROM THE TRACTOR PEOPLE WHO MAKE THE BIG ONES |
||||
ALLIS-CHALMERS |
Source: Allis-Chalmers sales/spec sheet, OPE-1016, courtesy of Del Allen
Edited by Kent
Recommended Comments
There are no comments to display.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.