A-10 post hole digger
for Allis-Chalmers lawn and garden tractors
Dig holes up to 30 inches deep quickly and easily with the Allis-Chalmers A-10 post hole digger. Save time and effort setting fence posts, planting trees, putting up rural mail boxes and doing many other chores.
Auger is raised and lowered by a clutch-controlled belt drive from the tractor's front PTO and drive shaft. The 2.5 GPM hydraulic pump is also driven off the tractor's front PTO.
Augers come in 4 to 14 inch diameters. Serrated cutting edges are available for 9 through 14 inch sizes. Mast can be tilted forward or back and from side to side to keep auger vertical when tractor is parked on a slope or uneven ground.
SPECIFICATIONS
Click for a closer view
A-10 Post Hole Digger
Digging depth | 30" (without extension) | |
Hole diameter | 4" minimum, 14" maximum | |
Auger sizes | 4", 6", 9", 10", 12", 14" | |
Mechanical tilting adjustment | ||
Forward and back | 24 ° (12 ° forward, 12 ° hack) | |
Side to side | 36 ° (18 ° right, 18 ° left) | |
Hydraulic system | ||
Pump drive | Belt | |
Pump capacity | 2.5 GPM | |
Pressure | 750 PSI @ 3600 RPM | |
Relief valve selling | 1500 PSi | |
Reservoir capacity | 2 qts. | |
Oil filler | Screen | |
Overall height | 75" | |
Ground clearance | 4-1/2" | |
Weight (less auger) | 446 lbs. | |
Allis-Chalmers reserves the right to make changes or add improvements to these specifications without notice or obligation. |
||
FROM THE TRACTOR PEOPLE WHO MAKE THE BIG ONES |
||
|
ALLIS-CHALMERS |
Source: Allis-Chalmers sales/spec sheet, OPE 1015, courtesy of Del Allen
Edited by Kent
Recommended Comments
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.