Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

  • Sign in to follow this  

    Page 3


    Guest
    TRANSMISSION CONTROL

    The primary purpose for using hydrostatic transmissions on turf and garden equipment is the ability to provide an infinite selection of   ground speeds. The key to varying the output speed is that the motor pistons require a positive volume of oil under pressure to react. The amount of oil displaced by the pump must be accepted by the motor. More oil will cause the motor cylinder block to rotate faster, less oil will slow rotation.

    Two methods can be used to change the volume of the pump. The most obvious way is to change the speed of the engine turning the pump. Running the engine faster results in more piston strokes per minute, increasing the volume. Slowing engine speed would decrease the number of piston strokes.
      Our application in a tractor however, requires that engine speed remain constant to power attachments such as mower decks, tillers, snowthrowers etc., so this method would not suit the application.

    The second method is to vary the length of the piston stroke in the pump. By changing the angle of the plate (properly referred to as the swash plate,  Fig. 6) we note that the length of each piston stroke can be changed. By mounting the swash plate on a pintle or pivot, a lever can be used to 8hange the angle. When the plate is 90 ° to the piston bore, no piston travel occurs and no oil flows to the motor.

    By moving the swash plate beyond 900, the positive pressure is created on the opposite half of the pump cylinder block, and the motor cylinder block receiving the positive pressure on the opposite side turns in reverse rotation.   This provides the tractor with infinite speed selection in reverse also.

    Click for a closer view
    figure_6.JPG

    [Source: Simplicity publication, Hydraulic Systems Training Information, #840172, Principles and Operation of Tractor Hydraulic Systems]


      Report Post
    Sign in to follow this  


    User Feedback

    Recommended Comments

    There are no comments to display.



    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now


×